firewarrior
New member
- 10
- 2
- 3
- Location
- Midland,Tx
I know this post is 2 yrs old, but I want to say thanks for doing this...I just upgraded mine using your instructions and everything looks and works perfectly!!
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Thanks. I am still running on the original EG22 relay I installed at the time of doing this. I have inspected it a couple times and one time, there was some condensation in the plastic housing. I removed the cap that I had installed and put a downward facing pipe on it so it could breath. Haven't checked it since I did that. Having it open means if I ford water up to the box, the box will fill up with water, so this is a temporary solution I don't care for. Still deciding what to do.I know this post is 2 yrs old, but I want to say thanks for doing this...I just upgraded mine using your instructions and everything looks and works perfectly!!
I have the same plug I just soldered the wire to the pins.OK, I set out to do this repair and low and behold, my flasher is different. My cannon connector is molded into the box. I was able to remove most of the sealant puddy around the connector but all i was left with was 3 pins that came out the back of the connector. Any idea of a part # for just the cannon connector? I have my napa guy searching but haven't heard anything just yet.
I have received the parts, built and installed the unit and can report that the box I mention above mounts perfectly to the original bolt holes (using the original bolts, after drilling out the mounting tab holes a little).
Did problem get solved?Argh. Went to put my new relay on and nothing! And my drivers side headlamp popped. Any ideas? Clinto, Can you message me?
He had PM'd me and we spoke offline.Did problem get solved?
What was issue if so?
All issues and fixes should be posted here so it will help others.
Noticed Clinto didn’t post anything after your question.
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!