Phillip724
New member
- 5
- 1
- 3
- Location
- Rocky mount va
I'm not getting a ground to my GP relay from GP card( light blue wire). Tried another card with no difference. What provides the card a negative?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M1008 glow plug relay
- Thread starter Phillip724
- Start date
- 1,353
- 895
- 113
- Location
- State College, PA
Phillip724
New member
- 5
- 1
- 3
- Location
- Rocky mount va
Okay Thanks. It goes through the small plug. Is that going straight to ground or to the fuse panel?
- 1,353
- 895
- 113
- Location
- State College, PA
The schematic shows that it eventually is connected to the main ground bar on the fire wall.
Phillip724
New member
- 5
- 1
- 3
- Location
- Rocky mount va
Okay thanks again I'll have to trace it back.
MarcusOReallyus
Well-known member
- 4,524
- 811
- 113
- Location
- Virginia
There is ONE ground point for everything in the dash (which is a poor design). I'm pretty sure that includes the electronics under the dash. It's a 6 pronged connector up above the parking brake mechanism. It's slightly different from one truck to another, but it's in that neighborhood.
Also check continuity on that light blue wire.
Also check continuity on that light blue wire.
Phillip724
New member
- 5
- 1
- 3
- Location
- Rocky mount va
Okay Ill check both thanks a lot!