m1008

[100acre]

What would be a reason for my reverse lights not working? I've replaced the bulbs, the fuses are fine and the plug underneath the rear bumper is plugged in. I am at a loss

 

[allenhillview]

Check voltage at plugs different places transmission, rear first since that is the easiest and my be where you get to start trouble-shooting

 

[100acre]

gage setting thingy

In my M1008, the mount that the gages sets in what is it called and where can I find one? Pieces keep snapping off on me and LMC doesn't make one

 

[allenhillview]

You mean all around speedo , gen lights, all that?

 

[100acre]

yes

 

[porkysplace]

What would be a reason for my reverse lights not working? I've replaced the bulbs, the fuses are fine and the plug underneath the rear bumper is plugged in. I am at a loss

Check the grounds and adjustment of switch on the bottom of steering colum.

 

[allenhillview]

yes

LMC did have them, classic industries, brothers, I'll check part #

 

[allenhillview]

Lmc part#38-8112 Classic Industries part# is 373509211 they are not cheap but can be had.

 

[100acre]

That isnt it. I need the thingy that the gages set into. the mount that has the printed circuit board on the back. Thanks

 

[combatmech]

There is a back-up light switch on the colum, near the fire wall, might be out of alignment. Autozone, or NAPA should have them. Dont recall the p/n.....

 

[allenhillview]

That isnt it. I need the thingy that the gages set into. the mount that has the printed circuit board on the back. Thanks

OK now I'm on the same page with you. I looked some more nothing. I'll try more resources that I'm looking at

 

[combatmech]

From the LMC catalog.....Item #8. It's mounted on top of the steering colum, pretty easy to change.
LMC Truck Parts - Page 148

 

[Warthog]

That isnt it. I need the thingy that the gages set into. the mount that has the printed circuit board on the back. Thanks

Used is the only option that I know of.

 

[100acre]

????

From the LMC catalog.....Item #8. It's mounted on top of the steering colum, pretty easy to change.
LMC Truck Parts - Page 148

we must have different catalogs in mine pg 148 item # 8 is a U bolt for the leaf springs and axle for the front suspension. Ive got the 2011 fall edition

 

[100acre]

?

There is a back-up light switch on the colum, near the fire wall, might be out of alignment. Autozone, or NAPA should have them. Dont recall the p/n.....

what is the technical name for it there is a napa that knows me well because of my cucv

 

[combatmech]

Sorry about the bad link..... The 20P calls it a "neutral safety switch"