kurtb
Member
- 36
- 0
- 6
- Location
- Tucson, AZ
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M1009 Auction
- Thread starter kurtb
- Start date
kurtb
Member
- 36
- 0
- 6
- Location
- Tucson, AZ
Sorry, M1008's
Sorry, M1008's
Sorry, M1008's
gasser
New member
- 316
- 1
- 0
- Location
- Ocean Springs, MS
RE: Sorry, M1008
Hi, were you thinking about bidding on both?
Questioning on the "Engine no good".... do they mean that it won't turn over (maybe siezed) or that it won't start.
If anything, you maybe able to combine the two together to make one .... like the one without the bed be the parts truck. Those m1008s have good axles.
IMHO:
The one without the bed --- Parts.
The one with the bed ------- Runner.
HTH,
-graham
Hi, were you thinking about bidding on both?
Questioning on the "Engine no good".... do they mean that it won't turn over (maybe siezed) or that it won't start.
If anything, you maybe able to combine the two together to make one .... like the one without the bed be the parts truck. Those m1008s have good axles.
IMHO:
The one without the bed --- Parts.
The one with the bed ------- Runner.
HTH,
-graham
BKinzey
New member
- 225
- 2
- 0
- Location
- Hollywood, CA
Very good axles. 14 Bolt w/ detroit locker. D60 in front. I'm guessing all you're going to hear is "They don't run." Certainly the axles are worth more than the current bids. Worth a look if you can.
- 7,584
- 361
- 83
- Location
- Cheyenne, WY
They are both rebuildable. the front axles on those are EXPENSIVE! you need to buy them both. I wish they were closer, motors (6.2's) are cheap and so are the beds. 