tgtaylor64
Member
- 199
- 4
- 18
- Location
- Florence, SC
Does anyone have this sticker on the drivers side fender? Does anyone have the same GM codes?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M1009 Fender Sticker
- Thread starter tgtaylor64
- Start date
dstang97
Well-known member
- 1,861
- 33
- 48
- Location
- Clover, SC
Blazers should all be the same and the trucks will be a little different
Here is how to look it up
http://www.c2e.info/rpocodes/
Here is how to look it up
http://www.c2e.info/rpocodes/
dstang97
Well-known member
- 1,861
- 33
- 48
- Location
- Clover, SC
83/84 build date on the fender.
DrJekl
Member
- 268
- 1
- 18
- Location
- Clarksville, TN
One was in the glove box and one was on the driver's fender. The one on the fender generally falls off because of exposure. The codes are RPO codes. There are extensive lists of RPO codes out there. Many like engine codes, axle ratios, locking diff, etc. remain the same accross the fleet. They are especially helpfull if you are looking for a locking diff (G80) or a specific gear ratio when you do not really want to go from axle to axle trying to figure it out. Yes, I know these can get changed out but it can be a starting point to decide if you want to waste your time looking or not.
IdahoPlowboy
Member
- 286
- 13
- 18
- Location
- Ririe Idaho
My 1028 has this.
mudman
New member
- 383
- 10
- 0
- Location
- Carson City, NV
My 1028 has this in the glove box.