• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

m1009 fuel question. i think

lussks

New member
12
0
1
Location
santa ana ,california
Been working on this project. Got it running, runs good strong motor... But i have a problem if i drive it for a while shut it off when I go to start it within couple minutes I have push the gas pedal to het her going again all the help will be helpful thanks
 

chevyCUCV

New member
598
3
0
Location
Massachusetts
Air leaking into the system, Too slow of a cranking speed, Worn IP

Put a clear fuel line on the return line from the IP and look for bubbles.
Does it start easy first time of the day with no pedal and minimal cranking?
 

lussks

New member
12
0
1
Location
santa ana ,california
I can drive it 2mins or 2 hrs its the same I have to hold the gas pedal 1/4 throttle to start up. If i just crank it over it won't start.

Wats the best way to check for air leaks in the fuel system. Thanks
 
Top