M1009 Hole size for Antenna Cable

[mutt1966]

I want to drill the holes in the fiberglass top for the radio cables to go threw to the antenna anyone know the correct size for the HOLE SAW I cant seem to find it in the manusls........Thanks for any help...Scott O&O

 

[Firejareen]

I have the Phase I and Phase II directions in hand, and according to them the hole in the fiberglass is 1.187". These holes would be depending on the location of the antenna bracket, front or rear, at the bottom corners of the window. There is also a grommet that is inserted into the hole to help seal out the weather which you will need. I tried to scan them but my computer is jacked right now. I will try again tomorrow.

 

[MarcusOReallyus]

That's a weird size. It's a bit under 1 1/8". Inch and an eighth is 1.1875.

Should be close enough!