JG Sky Soldier
New member
- 17
- 5
- 3
- Location
- Decatur, AL
Does anyone have a CUCV M1010 that has a front / cab AC added that actually works.... I interested in how the exsisting (Rear) AC is tapped into, etc. for the cab unit? Thanks
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Exactly! I could keep the box at 70 and the cab would stay around 90+. I did finally get it to where I could cool my right shoulder but that was about it.Many members have tried creative ducting but I've not seen one worth a darn.
I would think that you should be able to do just that, the system is so large as is that the small cab unit shouldn't be a hard thing to get to work.I know I am reaching but I want to see IF there is anyway to interphase
BOTh units.... With both the evaporator and condensor in the upper unit
there is a problem tapping into the line between the two to create a
unit similar to a Yukon's front and rear air.... Trying to see IF anyone
has any ideas....