Outriiger arms for loading stretcher patents in the upper bunks. And the M1010 only has one and it is switched from side to side by pulling a pin. The right side has a pinch clamp to stow it tight against the rear upper header panel when not in use. Very strong arm suupported by the inner steel structure.
Well, one person who on this board was giving away the interior of his newly acquired M1010 has not gotten back to me. I told him I would strip it out. I figure when it's time for me to buy an M1010, the rear box might be missing parts and his interior would come handy. When I buy, I'm NOT interested in destroying an M1010. The true value is gone when any MV is converted.
I'm interested in checking size, storage ability, comfort and overall livability. Also, adding a tent to attach magnetically on the rear with doors open for additional space. Adding a 30 amp plug inside the heater box to attach a generator for external power and a couple 115v outlets in the lower cabinets for power. All unseen when heater door and cabinet slide are closed. Also checking air conditioner size to change over to air and heater conditioner. Any mods I make will not be seen for shows, parades or special events.