OG
New member
- 17
- 0
- 1
- Location
- San Jose, CA
I have trouble finding new seals for M101A1. Part says National 55010, but I could not find in online anywhere. Any ides where can I find it, or what replacement
would do?!
OG
would do?!
OG
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M101A1 grease seals
- Thread starter OG
- Start date
zak
Member
- 610
- -4
- 18
- Location
- Ortonville, Mi
I believe that the hub is the same as a M37
- 1,658
- 5
- 0
- Location
- Reidsville N.C.
You have the National # a parts store should be able to find them for you.
OG
New member
- 17
- 0
- 1
- Location
- San Jose, CA
OK, after some search, these are all parts necessary to rebuild the M101/M116 A1 (only A1!) hubs:
Bearings:
Timken 2984
Timken 28682
Races:
Timken 2924
Timken 28622
Seals
National (presumably National Seal) 55010
I was advised by a Steel Soldiers member that National #417485 seal would also work fine.
I found all those at the Worldwide Ball Bearings Location Service. For M101/M116 A2 and A3 oldiron.com ( sponsor of
Steel Soldiers ) has all neccessary parts.
OG
Bearings:
Timken 2984
Timken 28682
Races:
Timken 2924
Timken 28622
Seals
National (presumably National Seal) 55010
I was advised by a Steel Soldiers member that National #417485 seal would also work fine.
I found all those at the Worldwide Ball Bearings Location Service. For M101/M116 A2 and A3 oldiron.com ( sponsor of
Steel Soldiers ) has all neccessary parts.
OG
mkitchell
New member
- 19
- 0
- 1
- Location
- Logansport, IN
I found all of the parts I needed to rebuild my M101A1 hubs at vintagepowerwagons.com. All parts are listed under the M37 section.