- 2,102
- 32
- 38
- Location
- Delta Junction, Alaska
What is the bore size, of the wheel cylinder, of the M101A2 series trailers? Was trying to verify the specs. I think its 1 1/8". Right & left as: BP 17-020, & BP 17-030. Hoping that someone could verify this, so I can get the parts coming.
The Master cylinder is 1" bore. Threaded end is 1/2"x 20TPI, hole spacing is 3.44". I forgot to verify the bore length, but think its about 4.25". If you buy this as a Master cylinder for one of the many industrial forklifts, it will cost about a third as much as when purchased from a trailer supply.
The Master cylinder is 1" bore. Threaded end is 1/2"x 20TPI, hole spacing is 3.44". I forgot to verify the bore length, but think its about 4.25". If you buy this as a Master cylinder for one of the many industrial forklifts, it will cost about a third as much as when purchased from a trailer supply.
Last edited:
