• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M1031 dies when PTO is engaged

SmokeyDod

New member
206
2
0
Location
Easley, SC
Hey thanks great, I got my tech info from NG unit but would love to have TM. They said to put it in 2nd but after using you can use either if mico switch on shifter arm is set to engage.
 

woodyNla

New member
69
0
0
Location
Tallulah, La
As suspected, the proximity switch on the transfer case shifter is bad. I did the quick and dirty scotch lock bypass and it worked. Genset puts out correct voltage and the air compressor works great. I used it to air up the tires on the 1031. Too dang lazy to drive it over to the air compressor we have in the storage room! LOL Besides, I wanted to see if it worked or not.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks