• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

m105a2 paint job

Deuce007

New member
138
1
0
Location
North Dakota
I posted this thread in the paint and body works section and didn't get any bites so I want to try this thread in the trailers section instead. I am wanting to to a paint job on my m105a2 and was wondering if anyone was any recommendations of what paint I should use. I was thinking of using an oil based O.D. green and just use a spray gun to apply it but I am open to suggestions.
 

fuzzytoaster

Well-known member
Steel Soldiers Supporter
4,391
3,564
113
Location
Fort Worth, Texas
Rapco paint is what I suggest. Comes in both gallon buckets or spraypaint cans. I've done a whole truck with it before and it looks sharp.
 

Wildchild467

Well-known member
Steel Soldiers Supporter
2,052
58
48
Location
Milford / Michigan
I love the way my rapco went on. i suggest buying the gallons and using a regular automotive spray gun set-up to spray it. the paint takes a while to harden up where it wont "mar" or scratch.... but it sure does stick real good! i didnt primer mine or anything. i just used a DA to sand it down and smooth it up real nice before i sprayed it. i figure 2 gallons and you will definately have enough paint to do the whole thing inside and out.

I painted the side racks and stenciled it after i took this picture... but you get the idea.
 

Attachments

Top