• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

M1079 clearance light overload situation

Ronmar

Well-known member
3,188
6,477
113
Location
Port angeles wa
Or figure out where the wire is chafing and shorting to ground to pull the extra current... If they have the right bulbs in them(i came up with 28 lights) they should total about 220W and pull around 16A at 13.8V...

look for chafed wiring where it passes thru to the door, mine started popping that circuit due to a short there...
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks