• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M1088 Work Light Ground

brianhk91

New member
8
0
1
Location
Texas
The work lights on my AO M1088 quit working and I have identified the problem as a failed ground connection. The TM says it should be grounded with TL109. Per the TM TL109 is located in "zone " C209 on the wiring schematic and SH24. Is SH24 a physical location on the truck? Does anyone have a map of where SH24 physically is on the truck? Is there a map in the manual that I am missing?

Thanks for any help.
 

Ronmar

Well-known member
3,352
6,750
113
Location
Port angeles wa
C209 are the lattitude and longitude on the sheet and SH24 should indicate sheet or page 24 on the diagram…. The diagrams typically have dashed lines around parts of the drawing indicating a physical area on the truck…
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks