• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

M135 spit'n and sputter'n

ncduece

Member
138
1
18
Location
wilmington nc
one other note if the plugs are black they will show a spark out of the engine but alot of times will not fire when placed back in the engine, a note about the compression test, the gauges come with a check valve in them so the leaking down is a gauge problem, also open the throttle when doing the test.
 

butch atkins

New member
398
3
0
Location
Fountain Inn SC
looking thru the TM 9-1826D about the fuel level in the bowl,you said he had it at 3/4 inch below bowl surface,the TM says 1/2 +- 1/32 for fuel level in bowl,needs to raise fuel level,hope this helps,again,CHECK the plugs to see if it is running to rich,black sooty plugs,hope this helps,good luck
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks