• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

M35A2 Glad Hand Valve

18operator

Well-known member
1,081
1,818
113
Location
Seville, Ohio
Hey all, I was wondering if the glad hand valves at the back of the deuce are rebuildable. I recently installed an air chuck and a tee on to the plumbing off the glad hand and now the valve has an air leak. I did replace the leaky valve with a Chinese piece of cr** just to keep things from leaking. But I hated to change that big beefy domestic valve. So I just figured if any of you had the same leaky air valve and if you were able to rebuild it.
Thanks.
 

Attachments

gringeltaube

Staff Member
Super Moderator
Moderator
Steel Soldiers Supporter
6,872
2,232
113
Location
Montevideo/Uruguay
 

USAFSS-ColdWarrior

Chaplain
Super Moderator
Steel Soldiers Supporter
18,469
5,476
113
Location
San Angelo, Tom Green County, Texas USA
Thank you !
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks