Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
As I drive down the road the lights (interior and exterior) and turn off. After about 30 second (sometimes less) they come back on. I didn't know where to check from a ground / wiring perspective. Any help would be greatly appreciated.
Circuit breaker inside the 3 lever light switch is cycling. It could be a momentary short to ground somewhere, too much load, or a weak circuit breaker.
I dont know if it helps, but when it is acting up turning the switches off and back on it stays off. I dont follow where the circuit breaker is? Mind helping explain where I need to check?
Mine would do the same thing when I ran with the high beams on, weak thermal breaker ( as already mentioned )
was my problem changed out the 3 lever and all is fine
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.