rizzo
Active member
- 2,841
- 8
- 38
- Location
- Port Huron, MI
I talked to the drive shaft place today. It will cost me about $200+ to get one made. He needs some info.
1. will the shaft go less than 500 RPM's?
2.what size are the stock u joints? will a 1000 series be strong enough? the next size up is a 1310.
thanks in advance
1. will the shaft go less than 500 RPM's?
2.what size are the stock u joints? will a 1000 series be strong enough? the next size up is a 1310.
thanks in advance