I took the truck for her first ride in 6 years. She upshifted just fine but downshifting to 4th would result in grinding. I can downshift to 3rd when she slows down enough. Again, upshifting is fine, oil levels good. Any ideas? BTW, transfer case was in high.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M818 won't downshift
- Thread starter bigmike
- Start date
deuceman51
Member
- 885
- 9
- 18
- Location
- Scotland South Dakota
Sounds like your RPM are still too high. I have this problem with all M809s that I drive. The motor dang near has to be to idle before you can downshift or else grinding will occur. It shifts a lot different than a deuce.
eldgenb
Member
- 748
- 1
- 16
- Location
- Spokane WA
sounds normal to me.
greenjeepster
New member
- 1,773
- 9
- 0
- Location
- Southbury, CT
Sounds like 6 years of out of practice.
- 1,955
- 410
- 68
- Location
- Culver City, CA
bigmike...my 818 performs the same way. Just let her wind down a little more.