- 146
- 186
- 43
- Location
- Charleston, SC
First trip with the tri-axle tag behind the M917. Volvo ec140 loaded up ready to roll.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M917 got a shiny new trailer.
- Thread starter Abrant23
- Start date
turnkey
New member
- 757
- 2
- 0
- Location
- wadsworth,ill
Looking good from here...
dilligaf13
Active member
- 558
- 26
- 28
- Location
- south, florida
That's a sharp rig!!
JohnnyBM931A2
Member
- 877
- 1
- 18
- Location
- Crystal Lake, Illinois
Looks awesome dude 
I'm not familiar with that truck model.. Do they all have a drop down third axle, or did you add that yourself?
I'm not familiar with that truck model.. Do they all have a drop down third axle, or did you add that yourself?- 146
- 186
- 43
- Location
- Charleston, SC
The 917 came standard with the pusher axle.Looks awesome dude
JohnnyBM931A2
Member
- 877
- 1
- 18
- Location
- Crystal Lake, Illinois
Good to know. Thanks
wreckerman893
Possum Connoisseur
- 15,612
- 1,984
- 113
- Location
- Akenback acres near Gadsden, AL
That rig is tougher than woodpecker lips.![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]")
Ford Mechanic
Active member
- 1,805
- 6
- 38
- Location
- Edenton, NC
Awesome rig man! How'd she pull?
- 1,010
- 4
- 0
- Location
- Annapolis MD
Wow now that's a setup !
Sweet!
Those look like 1600's yes?
(If so, don't run at night till you lower the headlights. )
54"? from ground to center of lens MAX I FED law states I believe. I bet-ya you are
almost 2" over that limit. Some guys could care less, I have a
SUPER LARGE insurance co for a client in in there head attorneys
office there is a big giant picture depicting just this issue...
If anything ever goes wrong w/ lights on and too high your instantly at fault.
There are electrical junction buss bar type deals under
both headlights / mounts FWIW if you might think about
lowering them that way.
You can kill them, and bolt on anew as well.
It is a litigating society...be forwarned.
No matter that is BAD ASS!
PS, I have ONE Upgraded Niehoff charging system left for sale
if you are running the Big Cam and want A/C . Visit my thread
"Artisan's M916" for the 411. I also have one CAT 7155 shift box
NOS FS too.
Those look like 1600's yes?
(If so, don't run at night till you lower the headlights. )
54"? from ground to center of lens MAX I FED law states I believe. I bet-ya you are
almost 2" over that limit. Some guys could care less, I have a
SUPER LARGE insurance co for a client in in there head attorneys
office there is a big giant picture depicting just this issue...
If anything ever goes wrong w/ lights on and too high your instantly at fault.
There are electrical junction buss bar type deals under
both headlights / mounts FWIW if you might think about
lowering them that way.
You can kill them, and bolt on anew as well.
It is a litigating society...be forwarned.
No matter that is BAD ASS!
PS, I have ONE Upgraded Niehoff charging system left for sale
if you are running the Big Cam and want A/C . Visit my thread
"Artisan's M916" for the 411. I also have one CAT 7155 shift box
NOS FS too.
- 146
- 186
- 43
- Location
- Charleston, SC
She pulled like a dream. The tri-axle didn't even feel like it was back there except when I hit a few hills.
Artisan, I already installed the A/C, it was pretty straightforward. I am also a certified welder so the few brackets I had to make we're pretty easy. The a/c install also killed two birds with one stone as I was able to finally put a cup holder in the bracket I made to move the blower unit over. Best mod yet.
Artisan, I already installed the A/C, it was pretty straightforward. I am also a certified welder so the few brackets I had to make we're pretty easy. The a/c install also killed two birds with one stone as I was able to finally put a cup holder in the bracket I made to move the blower unit over. Best mod yet.
- 2,868
- 27
- 38
- Location
- Delta, PA.
Awesome work truck combo.
- 146
- 186
- 43
- Location
- Charleston, SC
Snapped another picture of the combo in its natural habitat. Moving the ex to the other side of the property!
- 146
- 186
- 43
- Location
- Charleston, SC
Yes sir, that's where that shiny new alternator is going. I parked it in the shop this evening and tore her down to get ready for the install. We are starting on a two mile long fence next week so the truck will be parked till after your package arrives so I figured I'd get her ready!
Last edited:
- 481
- 37
- 28
- Location
- Clayton, Illinois
I've been thinking of getting a 917 or putting a round bottom dump bed on my M920. We have similar setups.
Good deal! Your gonna love the C.E.Neihoff designed
upgraded charging system I am sending.
It's all boxed and scheduled to go to UPS tomorrow.
I will have UPS box the ALT again, to their specs, to
insure you get it w/o the UPS gorillas winning at
dropping it several times.
You will be relocating the 12V horn, it is there on the top rail where
you will mount the REGULATOR bracket I am sending that
is part of the kit. Do not bolt it down, you will do that when
mounting the Diagnostic LED Regulator.
NOW is a GREAT TIME to service the radiator hose assembly
that is right there if it needs help AND if you want to add a
120V Block heater NOW is a good time to do that as well.
I "think" Alex at www.idahomotorpool.com might have those.
maybe pull the ALT bracket and paint it if your as anal as me.
Look at my pics of my upgraded charging system in the "Artisans M916" thread.
I just flipped my horn upside down I think is what I did, but-some-however,
I will be deleting the stock electric horn and replacing it w/ a horn
off a 5-Ton that uses air, and use the center steering wheel horn
button to activate it. I will be mounting it on the PS Front bumper
aimed right at the idiot drivers to my starboard whom are challenged
and do not know how to LOOK when merging onto the freeway.
You can watch them suck on coffee and cigs or texting there boyfriends
and not look for one second while merging into traffic for incoming anything.
I drive 55 & defensively as you must w/ a big rig but stupid is as stupid does,
and you just-can't-fix-stupid...
Be sure to post pics!