Tommy Frantz
New member
- 44
- 1
- 0
- Location
- Salem, VA., USA
What size/type glad hands do these trucks use? I'm getting two (M9xx's) of these this week and would like to know what g/h's to get.
Thanks!
Tommy
Thanks!
Tommy
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M923 air brake work arounds....
- Thread starter quarkz
- Start date
05blackduramax
Member
- 190
- 4
- 18
- Location
- auburn,indiana
My m923 would not build enough air pressure to release the brakes. The air dryer pistion was stuck open,napa has a rebuild kit. I think I paid 70.00 for the kit and filters. When I got it apart the o-rings were dry. You might be able to take it apart and clean and lube it up.
- 2,159
- 66
- 48
- Location
- Zimmerman MN
I noticed you refered to the button on the dash as parking brake. Normal operation you shouldn't need to push it in. It's the spring brake override, not a parking brake. Pulled out it doesn't apply the spring brakes. Only the handle next to your seat applies the spring brakes. If I misunderstood, no harm no foul.