• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M923 at truck pulls

Gunzy

Well-known member
1,769
67
48
Location
Roy, Utah
This is my m923 pulling the sled at the truck pulls. I pulled 244 ft with the sled set up for the Pro Modified pullers. A full pull is 300 ft and most of the Pro's were in the 195 to 235 ft range. I don't think I did to bad. I ran 6X6 low and just set the Allison in 2nd and let the trans do it's job. The small surge near the end is when it down shifted to 1st. The thumbnail is side ways but the video isn't. Enjoy.
https://www.youtube.com/watch?v=cZX51ZRmDzw
 
Top