• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M923A2 CTIS issue

A

ABecker

New member
7
1
1
Location
Spring City,PA
If my truck sits for a few days and I start it, when the air pressure reaches 120psi I hear 2 bursts of air and then all the lights on the CTIS start blinking. The front tires also start to deflate immediately. My left front tire has a leak and is usually lower than the rest ( I read in previous posts that this might also cause the issue if all the tires are not inflated). If I unplug and plug back in the CTIS controller about 10 times it will start working properly. A while ago the pressure switch on tank 3 ( Top tank on passenger side ) was leaking but it stopped. I have replaced the CTIS controller and pressure transducer as suggested in previous posts but I still have the same issue. Any help on trouble shooting would be greatly appreciated. Thanks
 
Last edited:
You must log in or register to reply here.
108,866members
164,023threads
2,307,753posts
1,136online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks