• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

M998 spring length

86humv

Well-known member
Steel Soldiers Supporter
1,693
489
83
Location
Texas
Took this off hummer network....Same as front 998.
Years - 1998-2002
P/N - 12338316-1
Tie Wrap - Yellow
Spring Rate - 954 in/#
Free Length - 13.36"
Coil Diameter - 0.904"
 

Retiredwarhorses

Well-known member
Steel Soldiers Supporter
4,254
3,844
113
Location
Brentwood, Calif
Thanks Greg!
your truck should not have 954’s, I would put at minimum 1250lb in front and variables in the rear.
But better yet, when you going to dump that old tired 998 and buy an M1123 at the auction?
proves have never been cheaper....I’ve picked up Damn near new M1123’s with 27 miles on them for under $10k
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks