• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

MEP-002A Won't Crank

fireman5199

Member
65
0
6
Location
Strasburg, VA
I just got done adjusting my governor. Closed up the cover and when I tried to start set for a test run it tried to turn over for a split second to turn over then nothing no DC at all. No pumps no panel lights. Let it set for a few minutes turn it to prime the pumps would run on both settings then tried to turn to preheat heard a click then same thing no DC. Seems I am tripping a breaker but I don't know where or why.

The unit ran fine just a few days ago. All battery connections are good.

Looked in TM can't find it in trouble shooting, may have overlooked. Tried search can't find a thread with a similar issue.

I did remove the right side ASK panel and haven't put it back yet.
 
Last edited:

fireman5199

Member
65
0
6
Location
Strasburg, VA
Yea...I hate when I do this. The clamps were tight on the batteriesbut I pulled on the ground and it came off in my hand. Fixed now.
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks