• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Mep-003a no.1 piston

Dog Breath

Active member
Steel Soldiers Supporter
94
152
33
Location
Wisconsin
I would like to confirm that no.1 piston is on the fan side and firing order is 1234 for valve adjustment. I cannot find firing order in any of the manuals or a search
 

Dog Breath

Active member
Steel Soldiers Supporter
94
152
33
Location
Wisconsin
Guy fang I did find that but apparently it didn’t sink in the first time. I read the first part of it for pistons 1&2and got side tracked. 🤦🏻‍♂️ I was mainly looking to confirm which piston was no1. The fan side. Anyway both units- valves are adjusted and injectors are in. Going together good. Tomorrow the fuel systems get cleaned out and fresh oil. Thanks again for all your help
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks