• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

MEP-004a 15kw 400hz Starts, but wont run w/out battle short

GiftedFaithful

New member
8
0
0
Location
North Carolina
Unit fires and runs well, even if held for 60 seconds of more, once start is released she dies right out. If battle short is engaged it will run fine for unlimited time. Any ideas or suggestions?
 

derf

Member
926
13
18
Location
LA
Maintain battle short.
There is probably a relay bad or sensor somewhere. Whatever the battle short shorts is likely the culprit. Is there not a troubleshooting item in the TM about this?
 

PeterD

New member
622
6
0
Location
Jaffrey, NH
Just to be a nit-picking jerk, a MEP-004a is not 400 Hz... If it is 400 Hz then it is a MEP-113A.

That bit of lame verbiage over, a couple of things, did you do a light test on the light panel? If yes, do all lights work correctly? If not do so. Once all bulbs are OK, which lights (if any) are on when it is running?
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks