MEP-531A Owners------- What do you guys use this Gen Set for in the Civilian World?

[Tinstar]

I picked up a 2006 MEP-531A yesterday with 27 hours on it and it is in almost new condition.
(The fuel lines need replaced)
Price too good to pass up.

What is this generator used for outside the Military?
I know what its "designed" for and what the military usually did with it.

What are you guys doing with it?
Is it worth keeping?

 

[Tinstar]

Plan to use the Tygon fuel line.
I like the idea of being able to see any bubbles since these are evidently notorious for being difficult to get air out of the fuel system.

 

[FarmingSmallKubota]

I keep One unit in the back of my LMTV for any power needs or if i need to charge batteries. As i fix these units i use them around the property to run 1500 watt space heaters while working on equipment outside, or charging batteries, or using heat gun or portaband saw. I have sold many units and they were going to use them for back up power in a power outage specifically one customer has a grandson that needs medical equipment to run, another customer is powering his construction trailer. many uses they just need a small trailer, strong back or a place where they can be mounted and remain

 

[Tinstar]

Ok
Thanks for the comments
Agree about the weight of the unit.
Just set the generator in the back of my cargo trailer and was quickly remined of my age.

I did read a few old threads about the tricks, like using a zip tie to tie down the fuel line in a way to make any bubbles go up, to be easier to bleed out.

I'll find out if it even runs and makes power later this week.
The heat/humidity lately has been oppressive.

 

[2Pbfeet]

Ok
Thanks for the comments
Agree about the weight of the unit.
Just set the generator in the back of my cargo trailer and was quickly remined of my age.

I did read a few old threads about the tricks, like using a zip tie to tie down the fuel line in a way to make any bubbles go up, to be easier to bleed out.

I'll find out if it even runs and makes power later this week.
The heat/humidity lately has been oppressive.

Congratulations on the buy. It looks to be in nice shape.

Judging by the residue in the fuel filter, you might want to clean the fuel tank, and then fill the new filter with a dose of SeaFoam.

Yes, priming is key with this engine, the high pressure side especially. In general though, I think it is rock solid.

All the best,

2Pbfeet