Mep-802a part numbers for panels

[Rikjames92]

Hello! New member here. Ive been working on these 2 802A and one of them has some panel damage from what looks like a fork lift. I found part numbers in the manuals but they seem to be obsolete. Does anyone have new or updated part numbers for the panel. I can't buy used panels because its for my job and they need a good NSN or part number to run through the system.

 

[loosegravel]

Hello! New member here. Ive been working on these 2 802A and one of them has some panel damage from what looks like a fork lift. I found part numbers in the manuals but they seem to be obsolete. Does anyone have new or updated part numbers for the panel. I can't buy used panels because its for my job and they need a good NSN or part number to run through the system.

This guy is an awesome person who is making and supplying these panels. Check him out! https://www.steelsoldiers.com/threa...r-mep-802a-and-803a-88-20198-in-stock.196471/

 

[loosegravel]

Hello! New member here. Ive been working on these 2 802A and one of them has some panel damage from what looks like a fork lift. I found part numbers in the manuals but they seem to be obsolete. Does anyone have new or updated part numbers for the panel. I can't buy used panels because its for my job and they need a good NSN or part number to run through the system.

Sorry, I sent you the wrong link. https://www.steelsoldiers.com/threads/mep-803-813a-replacement-door-starter-side-88-20078.196472/

 

[Rikjames92]

Thank you for the response. Unfortunately I will need a part number or NSN.

 

[Light in the Dark]

I don't believe you will be able to. You see the code 'XDOZZ'? That normally means cannibalization only. See attached.

 

[DieselAddict]

You aren't going to find those panels anywhere. Those units are out of production. The link given above is to one of the SS members that is making the panels to order.

 

[Rikjames92]

Thanks guys. I really appreciate the help. Ive been searching for 2 days now and that clears it all up.

 

[rcamacho]

I’ve found it is fairly easy to straighten minor panel damage on the 802/803 series...


Sent from my iPhone using Tapatalk

 

[Rikjames92]

I’ve found it is fairly easy to straighten minor panel damage on the 802/803 series...


Sent from my iPhone using Tapatalk

Yeah im going to have to hammer out what i can. the generator housing is ripped behind the storage box door so that is just going to have to be ugly

 

[DieselAddict]

Take it slow. Aluminum work hardens really quick and tears. I bought one that had a bashed in top and was able to make it look pretty good with some patience.