mep-803a coolant temperature sender

[cbisson]

Well for coolant gauges you have a couple options (stock depending). This is a drop in replacement, but will read 15-20* higher than reality (though that has no effect on the coolant overtemp sensor which will still work properly if its too hot)

WI - Temperature Coolant Gauge MEP-802A MEP-803A 804A MEP-804B MEP-805A MEP 24 volt

I have aftermarket/alternative MEP fuel gauges as well; both coolant gauge and fuel gauges are $95 plus $13 shipping when purchased together. This is an inexpensive alternative for a coolant temperature gauge for tactical quiet series of generators (GENERATOR, 5KW, 10KW, 15KW, 30KW, 60KW TQG...

www.steelsoldiers.com

I have also personally used the DATCON 101587, but I don't see it available anywhere.

The one in the classifieds will work here. If you wanted it to be spot on, I am sure you could get the info from Beede on the resistance range and a suitable sender replacement... but it will work as is.

101586 - Datcon Water Temperature Gauge 24V 100-240F - 101586 - ALL Datcon Products - Datcon - automotive gauges - Vehicle Controls

101586 - Datcon Water Temperature Gauge, 100° - 240°F, Electrical, 24V, 2 1/16' (52mm), Black Bezel, Style: Heavy Duty Industrial

vehiclecontrols.com

 

[cbisson]

101586 - Datcon Water Temperature Gauge 24V 100-240F - 101586 - ALL Datcon Products - Datcon - automotive gauges - Vehicle Controls

101586 - Datcon Water Temperature Gauge, 100° - 240°F, Electrical, 24V, 2 1/16' (52mm), Black Bezel, Style: Heavy Duty Industrial

vehiclecontrols.com

There's also this one that appearance wise matches what I bought a couple years ago under the part number (101586) listed above. Has a different part number now....not sure if something changed or if the vendors website is inaccurate.

101582 - Datcon Water Temperature gauge 24V 100-280°F - 101582 - Datcon - automotive gauges - Vehicle Controls

101582 - Datcon Water Temperature Gauge, Scale: 100°-280°F / 40°-140°C, Type: Electrical, Voltage: 24V, Diameter: 2 1⁄16' (52mm), Black Bezel, Includes gauge mounting hardware, Style: Heavy Duty Industrial

vehiclecontrols.com

 

[2Pbfeet]

There's also this one that appearance wise matches what I bought a couple years ago under the part number (101586) listed above. Has a different part number now....not sure if something changed or if the vendors website is inaccurate.

101582 - Datcon Water Temperature gauge 24V 100-280°F - 101582 - Datcon - automotive gauges - Vehicle Controls

101582 - Datcon Water Temperature Gauge, Scale: 100°-280°F / 40°-140°C, Type: Electrical, Voltage: 24V, Diameter: 2 1⁄16' (52mm), Black Bezel, Includes gauge mounting hardware, Style: Heavy Duty Industrial

vehiclecontrols.com

FWIW: The gauges are basically the same, except the 101582 has Fahrenheit and Centigrade, while 101586 is just Fahrenheit.

All the best,

2Pbfeet