• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

MEP-804A Voltage Regulator Fuse (FU2) Blowing

Echo5Bravo

New member
11
2
3
Location
Greenville, SC
View attachment 743464

Hello, Echo, any chance you took a pic of the circuit board? I'm needing to replace the 14 pin chip in my VR (see pic) but I don't have a part#!
Regrettably I did not take any pictures. I searched the web for an electrical diagram as well as any pictures of the VR, but I didn't turn up anything useful. The closest thing I found was a picture from an old eBay auction which clearly shows the circuitry of the VR, but not enough resolution to make out any digits on the chip in question.
https://www.ebay.com/itm/19870-Volt...vip=true&rt=nc&_trksid=p2047675.m43663.l44720
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks