MEP Drawing restoration

[unclebeau]

The link worked well, along with the layers...
Thanks for all the hard work, along with the other helpers!

 

[DieselAddict]

I still cant get it to turn on and off. Heeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeelp!

Let me know if you can't do layers. I'll export everything as separate sheets.

 

[DieselAddict]

I posted a file with everything in separate sheets. It makes the file larger but you can see things easier if your reader software doesn't support layers.

5&10kw Colored DC Sch_CMEC_SeparateLayers.pdf

drive.google.com

 

[ted50]

Thank You Again Chris!!!
I was trying to figure out Adobe without much success and didn't want to let you know how much I don't get hi tech. As Guyfang said there are some old fossils on this site.
Thanks Ted

 

[DieselAddict]

Your welcome. I'm part fossil myself.

 

[rustystud]

I posted a file with everything in separate sheets. It makes the file larger but you can see things easier if your reader software doesn't support layers.

https://drive.google.com/open?id=0B2ucd1TGFTw_QkZLblNsRlBIcUE

Thanks ! That is great work you did ! The only question I have is how do you get rid of the "under development" so you can read the diagram better ?

 

[DieselAddict]

I'm still working on it. I'll remove the watermark as soon as its done.

It shouldn't be a problem to read through it. I made it very light. Just want anyone using it to know that its not fully vetted yet.

Here is the base layer without the watermark - https://drive.google.com/file/d/0B2...=sharing&resourcekey=0-ZjPWQDcRXlpipKUwjijT8w

 

[Demoh]

Wow this is awesome. Back a month or 2 ago when I first started going through all the TMs troubleshooting a no-start I actually made one of these in MS paint.... This is so much better. If you had a tip jar Id throw some change in.

 

[DieselAddict]

You're welcome. I'm glad its beneficial to the community. There will be more drawings restored as time allows.

 

[DieselAddict]

Thanks ! That is great work you did ! The only question I have is how do you get rid of the "under development" so you can read the diagram better ?

I removed the under development from the file since I've not gotten any more feedback on errors.

 

[flainn]

This is wonderful and very helpful. Thank you for your work on this.

 

[reset2]

Now I am a new owner of a 802a this diagram is great. I will have to put on my electrical hat and study in a quite room. Hopefully I will never need it (meaning my gen will keep on generating) but this will surly be an asset to my troubleshooting. Thanks for all that put this together.