Gudge2
New member
- 18
- 0
- 0
- Location
- Seattle, WA
I bought two MEP002s on M103A trailer. Both have their issues but one has me baffled. When I first got it I tested it after cleaning the fuel system. It puffed white smoke and kicked off. I shut it down so I could check the fuel system again. I installed civilian spin on fuel and oil filters. Fat dumb and happy I went to start it again and got the dreaded clunk. The fuel solenoid operates fine but I can't get the starter to fire. I swapped out a spare starter and still nothing. I opened up the lockout switch and readjusted. Still nothing. So in a moment of frustration I took my long handled screw driver and jump the starter solenoid. The starter kicked over fine...so it's getting power.
Any ideas?
Gen 2, had injector pump rebuilt. Started but smoked. I figure I didn't get timing right. I pulled the pump and retimed. Now it's not getting fuel to the injectors. I bled the system just like I did the first time. I don't get it. Any tricks...I cracked open the fuel lines at the injectors--nothing.
Any ideas?
Gen 2, had injector pump rebuilt. Started but smoked. I figure I didn't get timing right. I pulled the pump and retimed. Now it's not getting fuel to the injectors. I bled the system just like I did the first time. I don't get it. Any tricks...I cracked open the fuel lines at the injectors--nothing.