MTA 2018 OFFICAL SHOW THREAD , Info /buy/Sell/trade/Talk /All :)

kubotaman

Well-known member
Steel Soldiers Supporter
1,035
75
48
Location
RI/MI
I am stripping parts off a M54 based gasser Bridge Truck next week and can bring stuff to the show. I am only removing parts that I can pull off by myself with basic air tools, aka I will not be pulling the motor, cab tub, etc but dash parts, lights, engine components, etc are up for grabs. A lot of it also fits Deuce and other 5 ton types. Let me know by next Monday what you need.
 

art

Member
236
12
18
Location
Northern N.J.
For Sale @ Sussex Show

Looking forward to another great Sussex show
I will be at the usual spots O09-O12, Outside Covered 2nd Building on the end

  • For Sale OD Stuff - pm for details-
16 x 16 Frame Tent OD- Like new - Stand alone - best tent out there,
Rear Troop seat for Hummer - Used - $100 - 3 sets
PSP Runway Mats - 10' rursty 2 each $100ea
Wooden Tent Poles- Sets GP Small, MED, Large, Kitchen
M66 Ring mount set- with cradle
Silicone Brake Fluid - MIL SPEC
. DOT 5 Super Fresh Mfg Date
. Pints, Quarts, Gallons
US Padlock Sets, Keyed alike, 2, 4, 6, or 10 locks in a set.
. Keep all of your MV’s & stuff lock up with only one key that fits all the locks in your set.
. Also can rekey and repair American Locks.
Mermites, Insulated Food Containers, metal. For Sale Parts- Handles
Magazines, Supply line, Motor Pool and Military vehicle
Military books

Looking for:
Tires for M1008 CUCV Pickup LT235/85R16E RIB Load range E
Mermites - broken/crushed to use for parts with or without inserts &insert lids
Mil Padlocks - Keyless, Cut or Broken padlocks for parts -American Lock
 
Last edited:

Evil Dr. Porkchop

Well-known member
Supporting Vendor
1,944
230
63
Location
Colchester, VT
I'm planning on being there Friday and Saturday. I'm looking for some Gama Goat parts including a complete winch kit or parts, rear cargo cover, and the pins to connect the tractor to the back half.

I can bring most of the stuff I have listed in the classifieds. I'm parting out a complete m35a2 and have a few m37 parts trucks. I also have parts for m211 / m215 GMC trucks, CUCV parts, a few HMMWV things, a few m54 parts, and I'm parting out a MEP-803a generator as well. Other things I can bring include medium tow bars with 3/4" feet for $280, 20mm and tall 81mm ammo cans for $15 each, 25mm ammo cans for $25 each, and a NOS surge brake setup for m416a1 trailers.

If anyone wants any of that stuff let me know, otherwise I won't be bringing most of it.
 

cruzinz28

Member
321
15
18
Location
Maryland
So far this is what I have for sale and can bring to the show:

* HMMWV Matching Antenna Mounts
* 20,000 rebuilt garwood winch never mounted
* M105A2 Axle and Springs
* M35A2 Windshield Frame
* M35A2 NDT Tires with tubes
* M35A2 Arctic Hood Blanket and Side Covers (As seen installed on my old truck in pictures)
* New M105A2 Trailer Plug (Not pictured yet)

Send me a PM if your interested in anything listed

IMG_4700.jpgwinch_garwood_20_k_b.jpgIMG_1506.jpgIMG_1505.jpgIMG_1504.jpgIMG_1502.jpgIMG_1501.jpgIMG_4701.jpgwinch_garwood_20k_a.jpg02.jpg01.jpg03.jpg
 

Attachments

Jeep Nasty

Active member
360
170
43
Location
NH
I can bring down the following items.
Parts for M939 trucks. Apparently when I had 10 5 tons sitting at my house I went a little overkill on some spare parts now I don’t own any 5 tons and none of the stuff fits the one truck I do have.

Turn signal buckets 1 set

Heater motor

Indicator lights set

Turn signal switch 1

Protective control box 1

Turn signal switch

Bushings for headlight buckets 20

CTIS controller from M917

Keyed ignition switch set from those military guys

Door latches and locks right-hand and left-hand

Pulse tech charge of monitoring distribution center 3

Those military guys quiet wiper kit sets 4

Priming pump for a Cummins 8.3
2 of them
Spin on filter set up for Cummins 8.3

Secondary fuel filters for Cummins 8.3

Air dryer cartridges

Air compressor seal kits

Spare Road triangles

Headlight buckets

air intake cap for Humvee

New dog bone ends

Some random ABS brake parts CTIS air valves

Another CTIScontroller

Another headlight bucket

Tail light lenses

Front turn signal lenses

Air dryer cartridge for older AD-2 air dryer.
tons of angled D rings and shackles

Spare feet for medium towbar for the Humvee three-quarter inch pins I do not have any spares of the 1 inch pin feet

Whiffle tree

Giant snatch blocks.

M939 inner fender splash guards

CTIS valve covers.


PM me if your interested in anything.


Sent from my iPhone using Tapatalk
 

emr

New member
3,212
22
0
Location
landing , new jersey
The new web sites have been up for a couple weeks, Im a little behind, I noticed a flyer in a few posts back are on it !!

mtaswapmeet.us. IS NOW mtaswapmeet.com .. Thankis See YOU ALL AT THE SHOW!!!!!!!!!!!!!
 

CARNAC

The Envelope Please.
Supporting Vendor
8,245
512
113
Location
IVO Tokyo Japan
Guess who just flew in? Gotta make some phone calls but highly likely I'll see folks there.

I have a bunch more stuff to sell. Most haven't set prices on yet but this is my last load of stuff out of the northeast heading to TX. This stuff will be at or near market price cause kids are about to start college.

Still selling stuff as I leave the hobby with the exception of my Willys MB.

I have:
A near complete Common No 1 tool set. If you want that, speak up in a hurry cause it will be parted out at this show. The set will go for $12,000 and will not bring the entire set to the show unless I have a firm, serious buyer. I spent many years collecting it but gotta let it go.

All the tools are true and correct and are MIL NSN items.

Complete set up for a VRC 90 and some additional SINCGARS stuff
Thermal imagry night driving set up
1/4 ton trailer (not sure if a M100 or M416 or MB-T...don't care, it's for sale)
1" impact swench wrench set (NOS)
1" electric impact gun (NOS) goes from 3/4 to 2-1/2"
3/4" impact socket set by Wright (NOS) goes from 7/8 to 2"
3/4" non-impact socket set with ratchet, breaker bar, and T bar; by wright (NOS)
Battery charger PRO HD (near new condition)
1950's era Swiss Army Bike
General Mechanics Tool Kit GMTK of the -0250 (the black version) KD tool variety with the foam lined drawers
a tan ULCANs camo net NOS (with poles)
potentially some cargo tamers
Two PRC77 radios
One amplifier mount for the PRC77
A pair of special forces HST4A radios
A (one) satcom antenna that can be used with the HST4A
Some other unmentionables.

Bunch of military books
Bunch of military VHS videos
Bunch of other tools


I AM LOOKING FOR: an operational Willy MB WWII (preferably pre-Aug 1944) engine (can also swap mine as part of the deal).
Might be talked into a 5 or 10 kw 8XX series generator.
 
Last edited:

kubotaman

Well-known member
Steel Soldiers Supporter
1,035
75
48
Location
RI/MI
Guess who just flew in? Gotta make some phone calls but highly likely I'll see folks there.

I have a bunch more stuff to sell. Most haven't set prices on yet but this is my last load of stuff out of the northeast heading to TX. This stuff will be at or near market price cause kids are about to start college.

Still selling stuff as I leave the hobby with the exception of my Willys MB.

I have:
A near complete Common No 1 tool set. If you want that, speak up in a hurry cause it will be parted out at this show. The set will go for $12,000 and will not bring the entire set to the show unless I have a firm, serious buyer. I spent many years collecting it but gotta let it go.

All the tools are true and correct and are MIL NSN items.

Complete set up for a VRC 90 and some additional SINCGARS stuff
Thermal imagry night driving set up
1/4 ton trailer (not sure if a M100 or M416 or MB-T...don't care, it's for sale)
1" impact swench wrench set (NOS)
1" electric impact gun (NOS) goes from 3/4 to 2-1/2"
3/4" impact socket set by Wright (NOS) goes from 7/8 to 2"
3/4" non-impact socket set with ratchet, breaker bar, and T bar; by wright (NOS)
Battery charger PRO HD (near new condition)
1950's era Swiss Army Bike
General Mechanics Tool Kit GMTK of the -0250 (the black version) KD tool variety with the foam lined drawers
a tan ULCANs camo net NOS (with poles)
potentially some cargo tamers
Two PRC77 radios
One amplifier mount for the PRC77
A pair of special forces HST4A radios
A (one) satcom antenna that can be used with the HST4A
Some other unmentionables.

Bunch of military books
Bunch of military VHS videos
Bunch of other tools


I AM LOOKING FOR: an operational Willy MB WWII (preferably pre-Aug 1944) engine (can also swap mine as part of the deal).
Might be talked into a 5 or 10 kw 8XX series generator.
Know what spot you will be at?
 

25thIDAirAssault

Member
Steel Soldiers Supporter
265
1
18
Location
Augusta, New Jersey
Mkt items for sale

If anyone looking for NOS or take off MKT items, I have just about anything that came in the MKT's(From early gas fired M2A equipped MKT75s through the latest MKT99s). Also have several MKTs for sale, from $4800 and up. I am less than 10 miles from the show site, so anyone wanting to see MKTs or pick up heavy items, like 4" griddle, battery pack, MBU's, Aisle Rubber Matting, or any other heavy item, just PM me. I have 25 of so MBU V3 Burner Units for sale. All tested and serviced, prices range from $275 to $350. Have NOS MBU wiring or take off, offered in complete sets or individually.

Also have complete Deuce Garwood 10K winch set up, straight original frame, good fuel tank w/straps, ect.

John
 
Last edited:

mydingo

Member
55
2
8
Location
Bloomsbury NJ
DBD8FFFD-91D2-4511-9C84-2065DB6ECA5C.jpg899B8950-C952-4BEC-8461-6932CDC4086D.jpg6F242A8C-A2BA-4560-9DCC-1C69B7D9CA0B.jpgI can bring a few items to the show if anyone is interested

Armored grill for a M998 HMMWV $ 250.00 (Sold)

Desert tan M105 trailer cover excellent condition could use a cleaning from storage $ 250.00

Set of 4 rear seat cushions for a m998 HMMWV new in the box. $125.00
 
Last edited:

Cape Coastie

CWO4 ENG/MSS, USCG, RET.
Steel Soldiers Supporter
518
48
28
Location
Sandwich, MA
I have what I believe is a cab soft top for a HMMHV 2 door model. It is od green and was in the bed of my M105A2 when won at auction from Ft. Dix. Thought it was a cover for the trailer but when I went to put it on I realized it was not correct. Does have a few small tears but I am getting rid of it cheap if anyone wants it.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks