MV to Civilian Trailer Connector

[MDSA]

Fabricated a connector for the Deuce to pull my civilian trailer. Need to get the M37 to The NC Rally.

I had an extra pigtail so I wired a 4-pin connector that would go to my magnetic lights. It could go to the trailer plug, but this trailer is a pain to change bulbs. So I popped 24V bulbs in my magnetic lights and we're good to connect. I thought I was going to have to use a volt meter to determine what wires to connect, but I did a search and found this link. Made my job super easy. All I had to do was match the # off the pigtail wire to the diagram. No guess, no mess. Worked first time.

I can't find who posted it, but THANK YOU; it was very helpful.

http://www.steelsoldiers.com/attachments/cucv/206000d1286916969-m1009-trailer-conne

I made a 24' extension while I was at it. Overkill I know, but it's there if I need it.

 

[joeM62]

That helps alot thanks for sharing the info I have been looking to do something like that incase I found a civi trailor to go with my duce.

 

[wreckerman893]

I tried to copy and save that.....no soap......WTF....over?

 

[silverstate55]

I was able to save a copy...try this one: