TexAndy
Active member
- 1,427
- 16
- 38
- Location
- Bee County, Texas
Wow Rayzer, thanks for taking the pics for us.
Nice "Fording" grill, btw.
Nice "Fording" grill, btw.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
My transmission doesn't have a vent
- Thread starter TexAndy
- Start date
RAYZER
Well-known member
- 3,380
- 59
- 48
- Location
- sanford/florida
i bought about 100' of this hose from a surplus yard so i didn't keep track of how much i used, i think about 15' to 20'?
Heavysteven
New member
- 2,090
- 11
- 0
- Location
- Hickory Flat Ga
Mine had a plug and I replaced with a vent spring. No leaks or problems so far.
RAYZER
Well-known member
- 3,380
- 59
- 48
- Location
- sanford/florida
maybe the trans can have no vent because they can release pressure through the shift tower?
TexAndy
Active member
- 1,427
- 16
- 38
- Location
- Bee County, Texas
ok, I had an idea the other day...
In addition to the line running straight to the air cleaner box, how about another "T" with a valve and a regulator set to 1 or 2 PSI going to the air supply?
That way, in normal operation, the valve is set to vent axles, TC, and transmission to the air supply. In fording mode, you switch the position of the valve before you hit the water to pressurize those systems to 1 or 2 PSI, just like in the fording kit.
You could even have the valve be a solenoid, so all you'd have to do to switch is press a button in the cab. And add an air pressure switch on it to power a light, kind of like the front axle engagement switch, so you have feedback to tell you if the system is operating correctly.
What say ya'll?
In addition to the line running straight to the air cleaner box, how about another "T" with a valve and a regulator set to 1 or 2 PSI going to the air supply?
That way, in normal operation, the valve is set to vent axles, TC, and transmission to the air supply. In fording mode, you switch the position of the valve before you hit the water to pressurize those systems to 1 or 2 PSI, just like in the fording kit.
You could even have the valve be a solenoid, so all you'd have to do to switch is press a button in the cab. And add an air pressure switch on it to power a light, kind of like the front axle engagement switch, so you have feedback to tell you if the system is operating correctly.
What say ya'll?
steelandcanvas
Well-known member
- 6,187
- 87
- 48
- Location
- Southwestern Idaho
Is that what the fording systems put out, 1 or 2 pounds?
TexAndy
Active member
- 1,427
- 16
- 38
- Location
- Bee County, Texas
I don't know. That's part of why I'm mentioning the idea here.
But I can't imagine it's very much. All it needs is just enough positive pressure to keep water from invading the seals. And water pressure at a depth of 3 feet can't be very high.
But I can't imagine it's very much. All it needs is just enough positive pressure to keep water from invading the seals. And water pressure at a depth of 3 feet can't be very high.
RAYZER
Well-known member
- 3,380
- 59
- 48
- Location
- sanford/florida
you would need to put a shut off valve at the end of the line to hold the pressure in the system, you could manualy close it before you put the bellhousing fording plug in.
RAYZER
Well-known member
- 3,380
- 59
- 48
- Location
- sanford/florida
i think so, but check it out.