-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Need 401 air line for a M923a2
- Thread starter Mitchkrat
- Start date
Its just quarter inch dot nylon air line.
It should be cotton jacket from the lower firewall to the governor on the firewall.
It's actually a braided line all the way back from the governor to the dryer.
It's not required. A0 and a1 trucks use just nylon line there is no heat on it so I wouldn't worry with braided or jacketed lines unless you want to spend $600
- 8,399
- 2,440
- 113
- Location
- Monrovia, Ca.
Nylon v.s strattoflex type might be a wash. Fittings are through the roof on prices!
It is only the line that tells the dryer to pop off. Only a small amount of air/pressure there for a second.
Fittings
www.mcmaster.com
Tube
www.mcmaster.com
It is only the line that tells the dryer to pop off. Only a small amount of air/pressure there for a second.
Fittings
McMaster-Carr
McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.
Tube
McMaster-Carr
McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.