redrustyhill
Member
- 128
- 3
- 18
- Location
- scobey montana
i need the large supply hose from the tank to the pump if anyone has one!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
need a 12302871 hose assembly for m929
- Thread starter redrustyhill
- Start date
Post in the parts wanted section.
Otherwise take the hose to your hydraulic shop or tractor repair place and have them make it.
Sent from my SM-G935P using Tapatalk
- 2,702
- 739
- 113
- Location
- Oakwood, Ga
It is easiest to take to a hose supply shop. Make sure you get a narrow fitting on the inlet side or you will never get screwed back on.
Fill the line with diesel when reinstalling and startup is essier
Sent from my iPhone using Tapatalk
Fill the line with diesel when reinstalling and startup is essier
Sent from my iPhone using Tapatalk
- 9,604
- 1,485
- 113
- Location
- mid- michigan
If it is the hydraulic supply hose for the dump he don't want to put diesel in that .
Edit; It looks like he is looking for part #14 for the dump hydraulics.
Attachments
Last edited:
- 2,702
- 739
- 113
- Location
- Oakwood, Ga
It would help If I looked up the part number
I was thinking fuel supply line.AlthyzmersIt would help If I looked up the part number
Sent from my SM-G935P using Tapatalk
redrustyhill
Member
- 128
- 3
- 18
- Location
- scobey montana
Yes, part #14. There is no place here that makes hoses that big or else I would have one made locally
Sent from my SM-N900V using Tapatalk
redrustyhill
Member
- 128
- 3
- 18
- Location
- scobey montana
- 9,604
- 1,485
- 113
- Location
- mid- michigan
Check http://www.surpluscenter.com/
to see if they have anything that will work.
to see if they have anything that will work.
redrustyhill
Member
- 128
- 3
- 18
- Location
- scobey montana
They only go up to 1" hoses as well. The hose I need is 1.5"
Sent from my SM-N900V using Tapatalk
Midwest hose and specialty does in williston. As well as Chappel automotive in Glasgow. I dont know anywhere in wolf point. Only other town would be Sidney. They have farm equipment near you i know. Its more than likely 3/4 id or 7/8 id cotton jacket hose. Standard jic thread. You can email me pics of the hose and fitting numbers and anyone can have one made and shipped to you. Or call one of those places and have them ship it from nearby
redrustyhill
Member
- 128
- 3
- 18
- Location
- scobey montana
It's a 1.5" hose. Female JIC SWIVEL ON one end, 90 degree flat O-ring on the other
Sent from my SM-N900V using Tapatalk
redrustyhill
Member
- 128
- 3
- 18
- Location
- scobey montana
I will check with those places you mentioned and see if they can make one. 1.25" is the biggest anyone in town can make. Seeing it is not a pressure hose I might just cut the bad section off my hose and farmer rig it together so I can dump the load of rocks out.
Sent from my SM-N900V using Tapatalk
redrustyhill
Member
- 128
- 3
- 18
- Location
- scobey montana
I haven't pulled the hose off yet. I can when I get to it.
Sent from my SM-N900V using Tapatalk
- 9,604
- 1,485
- 113
- Location
- mid- michigan
Call C & C Equipment he builds a lot of military dumps and a good guy to deal with .
C & C Equipment
4111 State Road 45
Nashville, IN 47448
812-336-2894 office
C & C Equipment
4111 State Road 45
Nashville, IN 47448
812-336-2894 office