• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Need assy. Spec. for 2 piece HEMTT RIMS...

goldneagle

Well-known member
4,615
1,210
113
Location
Slidell, LA
I need the correct tightening pattern for bolting the 2 piece HEMTT rims together. The illustration in the TM 9-2320-279-20-2 that is posted in the TM section on SS is too blurry to read!

Please help I need it before tomorrow morning.
 

dm22630

New member
1,424
42
0
Location
Front Royal, VA 22630
I just tightened them across and rotated clockwise. 1st round was just to seat the 2 pieces on the o-ring.....2nd round was 500+ ft lbs to get them nice & tight.

I have had NO air-leaks in 2 months.
 
Top