Need part numbers

[corelokt]

First, I need a high idle temp sensor. Mine has a large, round connection on the top. Located drivers side, rear, top of head / block.
Second, Starter bracket.

 

[ralbelt]

Direct drive bkt 14028931
Gear reduction bkt 23502557

Sensor # should be in the TM

 

[Warthog]

The switch on the drivers side rear, top of head is the glowplug temp sensor, not the high idle.

 

[corelokt]

Where then is the high idle sensor? Mine is not working, connections at the control is is fine, both green wires connected. Engine was out for a head swap, and am now having issues. No high idle, hard to start after setting a while, and they put in a 12v gear reduction starter. My 24v solenoid has a broken connection I need to redo.
I am going to check the tightness of the pump connections and fix the solenoid, but am flumuxed on the high idle.
I also have a 2 wire connector on the passenger side, a green and a tan wire, just hanging...

 

[Warthog]

Its on the passenger rear.

Item #2 on the diagram from TM 9-2320-289-20P

 

[corelokt]

Thank you,
At least I know it's hidden behind the wire harness stuff now.