res0wc18
Member
- 552
- 2
- 18
- Location
- Everett, Wa
im putting my duece interior back together and its been so long i cant remember what its suppose to look like and what goes where!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
need pictures of the interior of a correct Deuce
- Thread starter res0wc18
- Start date
steelandcanvas
Well-known member
- 6,187
- 87
- 48
- Location
- Southwestern Idaho
Can you be more specific
What do you need to know Data plates Seats Gauges
What do you need to know Data plates Seats Gauges
- 3,657
- 28
- 48
- Location
- Dallas, Texas
hellrayzor1
Member
- 75
- 3
- 8
- Location
- peoria/ Az
I actually took a few pictures of my dash yesterday so I could start taking it apart for a new paint job. Hope these help out some.
As far as the rest of the cab, if you need anything specific just let me know and I'll take a pic of it. Mine is in need of a lot of work but I think most of the main stuff in correct, just ugly.
Mark
As far as the rest of the cab, if you need anything specific just let me know and I'll take a pic of it. Mine is in need of a lot of work but I think most of the main stuff in correct, just ugly.
Mark
Attachments
O.D. Fever
New member
- 545
- 2
- 0
- Location
- Howard City, Mi.
looks like mine ect. stop switch and master on are to far away from each other.. mine interlock, so the on, cant be on, if the off, is off.. go figuer.. Joe
res0wc18
Member
- 552
- 2
- 18
- Location
- Everett, Wa
yeah i need them of the dash including details of where switches and plates go along with the winshield details of sealing and clamps etc
also the heater control knobs etc how they are arranged etc
also the heater control knobs etc how they are arranged etc
Last edited:
littlebob
New member
- 1,548
- 26
- 0
- Location
- Baton Rouge LA
Been there done that. Had good intentions of taking pictures and didn't have one that was working when I dissembled the cab.
hellrayzor1
Member
- 75
- 3
- 8
- Location
- peoria/ Az
My windshield is all taken apart for painting at the moment, as soon as I get it done ill add some pix.
Mark
Mark
mckeeranger
Member
- 779
- 4
- 18
- Location
- Eastern Kentucky
These are current pix of my M35A2 dash and windshields.
The left windshield pic is a little dark, I was using a camera that wouldn't compensate for back lighting.
The bird crap on and above the glow plug control decal is optional. I don't think all trucks have it, at least not at that exact location.
Attachments
roscoe
New member
- 998
- 0
- 0
- Location
- Spencerville, Indiana
My defrost and air knobs are on the right side of the steering wheel under the guages.
LOCATION OF HEATER CONTROLS SEEMS TO BE AT THE OPTION OF THE MECHANIC WHO INSTALLED THE HEATER KIT. i HAVE SEEN THE KNOBS ON BOTH SIDES OF THE STEERING COLUMN AND (AT LEAST M 809 SERIES TRUCKS) THE HEATER UNIT UNDER THE HOOD CAN BE ON EITHER SIDE OF THE ENGINE. M 35S IT IS USUALLY ON THE DRIVER'S SIDE AS THEY AIR CLEANER FILLS MOST OF THE SPACE ON HTE PASSENGER'S SIDE.
Engine5
Member
- 393
- 2
- 18
- Location
- Millbury,MA
Does this help?
Attachments
res0wc18
Member
- 552
- 2
- 18
- Location
- Everett, Wa
thanks guys, yeah the heater kits are usually where ever ol slick willy put them!
Engine5, now if there were women in that pic i would say maybe!
Engine5, now if there were women in that pic i would say maybe!
Engine5
Member
- 393
- 2
- 18
- Location
- Millbury,MA
thanks guys, yeah the heater kits are usually where ever ol slick willy put them!
Engine5, now if there were women in that pic i would say maybe!
I have to protect the privacy of all clients,
What happens in the limo stays in the limo
