• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

need to replace non metal fuel lines at IP

Rodger

New member
129
0
0
Location
Placitas, New Mexico, USA
Hello All

If this is in the forum I could not find it.

There is fuel leaking from the non-metal (low pressure) lines on my injection pump.
Some of the connectors appear to be non military. Others are 44 years old.

any advice on where to get replacements & what to ask for would be appreciated.

thank you
Rodger
 

phil2968

Active member
2,591
18
38
Location
Lakeland, Florida
Go to Napa or a truck supply house and get some new line and some new ferules. this would be a good time to bypass the FDC if it is still hooked up.
 

two.fiveM35

Active member
1,234
11
38
Location
Victoria , Texas
I used line that I bought that looked like the line you would us for you ice maker. It worked for a while but stretched after a while. Other SS members recommend using air brake line. It been over a year and a half and I have had zero problems. Don't forget the new ferrules.
 
Top