New from New Orleans area - M116A1 Pioneer

Steel Soldiers is supported by:

Expedition

New member
7
0
0
Location
Mandeville, LA
Just picked up a pioneer tool trailer today. Previous owner sometime along the line swapped out the axle to a regular trailer axle with electric brakes and a 5 on 4.5 bolt pattern - and its too wide...

Need a few things...
- front landing leg, have the spring loaded pin in the casting, but the swivel/leg is MIA
- data plate, I have a picture of the original, but its long gone

Thanks in advance for all the help.
 

M1078MAN

Active member
Steel Soldiers Supporter
286
40
28
Location
SW Va, Roanoke County
Just a few months earlier. Buddy just did this swap, with the right width axle. so he could tow behind his cherokee sq bdy,to NM and he junked the old axle and landing leg..

how about some pictures
 

Expedition

New member
7
0
0
Location
Mandeville, LA
Posted some pics on the trailer forum. This one is in really good shape, no rust, only real issue is that axle and teeny tiny tires.

Thinking that a narrower axle and a set of 285/75/R16 MT tires will really set it up nicely.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks