• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

nitrogen canister in fire extingisher holder

CARNAC

The Envelope Please.
Supporting Vendor
8,277
617
113
Location
Corpus Christi, TX
No offense in this but I have to chuckle...

Everyone thinks it's a fire extinguisher mounting point. So many folks have never looked at the TM. Just have to chuckle.
 

Keith_J

Well-known member
3,657
1,314
113
Location
Schertz TX
That is for the DS2 operator decontamination sprayer. The thing LOOKS like a fire extinguisher but it is camouflaged, not red. DS2 will burn easily, especially if you spray it on dry STB (as if anyone has DS2 or STB ;-))

Why nitrogen? Because CO2 reacts with DS2. Why a cartridge? Because DS2 comes in 5 gallon cans. The decon units were only filled if expected to go into a possible area. It is used on the operator-contacted areas and only under MOPP level 4 which meant you didn't have to worry about it on the skin, the personal decon wipes are used for that.

These are much higher pressure than CO2. Be careful.
 
Top