• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

No start, please help

Bigbondo007

Member
59
63
18
Location
Arabi, ga
Help please!
84 m1028. Truck sat for 2 days, went to start it and didn't set the fast idle and the truck shut back down. Starter made a noise so I checked it after the engine shut down and had to put another bolt in. Tried to start the truck and it'll crank but not start. Getting fuel pressure in and out of the filter, getting small spurts at the injectors, pulled top of pump and its full and verified function of the shut off solenoid and the advance. Engine will start with fuel dumped in the intake but the truck won't start on its own. I'm out of solutions.


Sent from my SM-N950U using Tapatalk
 

Keith_J

Well-known member
3,657
1,313
113
Location
Schertz TX
Check the metering valve under the injection pump cover. With cover off, simulate the action of the engine kill solenoid, looking at the metering valve. It should rotate slightly when you release.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks