• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Official DENTON, NC Buy Sell Trade Thread 2023

F

forall71

New member
6
0
1
Location
Birmingham, alabama
Blake said:
I sold my CUCV and have the following used takeoff parts (unless otherwise noted) avail. I go to the rally for the good time and wont bring unless there are prior commitments. PM for questions or addition info.

m1008 fuel tank complete - $75
m1008 brake booster/ master cylinder - $75
CUCV radiator / came out of a parts truck - $150
CUCV injection pump core $100
CUCV steering box - $50
CUCV power steering pump with bracket and hoses - $250
m1009 rear drive shaft - $100
m1009 front drive shaft - $100
m1008 rear driveshaft - $250
m1008 front driveshaft - $100 - Matt444
New AC delco 6.2 water pump - $75
New purolator, fram, and casite engine oil filters - $3 each
New m1008 front brake hoses (to calipers) -$10 pair
CUCV air filter housing - $25
Complete 6.2L engine/unknown condition with no accessories - can take large or small parts off as needed
CUCV NP208 Transfer case - $150
CUCV TH400/torque converter / unknown condition (taken out of a parts truck) - $250
CUCV torque converter - $50
CUCV stock fuel filter housing - $50
M1008 rim/tire - $50
M1009 rim/ tire - $125
CUCV 24v gear reduction starter - $75
CUCV fan/clutch - $25
CUCV intake manifold $25
CUCV engine wiring harness - $250
CUCV dash wiring harness - $300
CUCV steering column - $75
Miscellaneous CUCV engine parts - PM direct for parts request
rolator, fram, and casite engine oil filters - $3 each
New m1008 front brake hoses (to calipers) -$10 pair
CUCV air filter housing - $25
Complete 6.2L engine/unknown condition with no accessories - can take large or small parts off as needed
CUCV NP208 Transfer case - $150
CUCV TH400/torque converter / unknown condition (taken out of a parts truck) - $250
CUCV torque converter - $50
CUCV stock fuel filter housing - $50
M1008 rim/tire - $50
M1009 rim/ tire - $125
CUCV 24v gear reduction starter - $75
CUCV fan/clutch - $25
CUCV intake manifold $25
CUCV engine wiring harness - $250
CUCV dash wiring harness - $300
CUCV steering column - $75
Miscellaneous CUCV engine parts - PM direct for parts request

Miscellaneous:
PRC25 and am2060 amplifier/power supply - $500
Large "wrecker" snatch block with loop/swivel on end - 3/4" cable - $200
M116a2 with MEP-003a 10KW diesel generator with fresh/new crate engine (must pickup in southeast virginia/ wont deliver to rally) - $2900
NOS Autolite "2245" military spark plugs for jeeps/trucks. Packaged under AR7S, 1966 date, made in USA- $30 each
Temper frame tent - 2 sections with ends. Total 16' long by 20' wide. Vinyl sides (tan) with vinyl ends (green), rain fly, raised stanchions, and floor. Extra vinyl tan sides. Stored inside. Frames in carrying bags. $800 for all
M35a2 outer windshield frame (no inners) - $75
M35a2 soft top bow/side pieces - $100
M16 military metal rifle rack - $75
Click to expand...
Curious if you had an instrument cluster? Base of mine has cracked and several attachment points have broken.
 
LanceRobson

LanceRobson

Well-known member
1,638
206
63
Location
Pinnacle, Stokes County, NC
matt444 said:
I don't have that much right now but I could probably get you a case or 2

Sent from my SM-S906U using Tapatalk
Click to expand...
Thanks, Matt. If you have a couple of cases I'd really appreciate them. Non-chlorinated preferred but either is OK. Please let ma know how much and how you want to be paid. I'm not sure if I'll be there Thursday evening or Friday AM yet.


Lance
 
matt444

matt444

Member
78
73
18
Location
Edgemoor SC
M105 trailer comes with steps, newer vinyl cover, ac, toolbox, and bed $1200 make offer
Can't have till Sunday

Old style strobe light bar 12V works but needs new bulbs $100

M105 trailer vinyl trailer cover $100

M35 cargo cover $200

Outdoor sink $50


Sent from my SM-S906U using Tapatalk
 
Recovry4x4

Recovry4x4

LLM/Member 785
Super Moderator
Steel Soldiers Supporter
34,014
1,814
113
Location
GA Mountains
Folks, I am in need of a deuce or 5 ton complete bow. Just one for now. Bow, 2 corners and 2 staves.
 
T

TheOrigin

New member
15
21
3
Location
North Carolina
forall71 said:
Curious if you had an instrument cluster? Base of mine has cracked and several attachment points have broken.
Click to expand...
I have a guage cluster from my m1028 I would let go.

I will be there with a few parts from my m1028 project and some M12 gun racks to sell.

One thing I am looking for is a tall boarding ladder for my truck. I'll have to get some measurements and see what I need. Probably find one that's extra tall and cut it down.
 
F

forall71

New member
6
0
1
Location
Birmingham, alabama
TheOrigin said:
I have a guage cluster from my m1028 I would let go.

I will be there with a few parts from my m1028 project and some M12 gun racks to sell.

One thing I am looking for is a tall boarding ladder for my truck. I'll have to get some measurements and see what I need. Probably find one that's extra tall and cut it down.
Click to expand...

are the attachment points and ribbon on the back in good shape?
 
WWIILBird

WWIILBird

Member
Steel Soldiers Supporter
88
14
18
Location
Northern NJ
Looking to buy two Humvee antenna bases and whip antennas to mount on my Humvee. I’ll be there Saturday morning.
 
RJTM998

RJTM998

Well-known member
178
373
63
Location
North Carolina
WWIILBird said:
Looking to buy two Humvee antenna bases and whip antennas to mount on my Humvee. I’ll be there Saturday morning.
Click to expand...
WWIILBird said:
Looking to buy two Humvee antenna bases and whip antennas to mount on my Humvee. I’ll be there Saturday morning.
Click to expand...
Find Todd Hergott I think he may be bringing some. If not a guy on Facebook has some NOS AS3900 ones for $250.00
 
SCM35A2

SCM35A2

Well-known member
Steel Soldiers Supporter
1,991
2,707
113
Location
Florence, SC
matt444 said:
M105 trailer comes with steps, newer vinyl cover, ac, toolbox, and bed $1200 make offer
Can't have till Sunday

Old style strobe light bar 12V works but needs new bulbs $100

M105 trailer vinyl trailer cover $100

M35 cargo cover $200

Outdoor sink $50


Sent from my SM-S906U using Tapatalk
Click to expand...
Hey Matt, if nobody has claimed the old style strobe light bar that you have then I'll take. I'm still not 100% sure If Ill be able to make it to the rally, but I can make a trip up to you to pick it up. Message me & let me know.
 
You must log in or register to reply here.
108,262members
163,593threads
2,301,926posts
1,237online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks