• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

oil leak at Injection pump to block

crzyxj

New member
28
0
1
Location
Lander, WY
How the heck do you change the line from the block to the Injection pump? I am having **** getting the old line off. Someone has installed a pushlock fitting on the block and the inj pump end is a flare nut. Any ideas that do not require pulling the pump?
 

cattlerepairman

Well-known member
Steel Soldiers Supporter
3,167
3,072
113
Location
NORTH (Canada)
It is tight and the steering box is in the way. Can you remove the injection pump end of the hose and then get an exacto knife up there to slice the hose off the pushLok fitting? You can't install the new hose that way, but it would give you more room to get a crow's foot wrench or similar up there.

https://www.steelsoldiers.com/showthread.php?113320-Busted-oil-line-at-the-injection-pump
some pictures in this thread: https://www.steelsoldiers.com/showthread.php?169340-Injection-pump-oil-hose
https://www.steelsoldiers.com/showthread.php?178291-Oil-Leak
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks