• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Oil Plug Drain Valve Source?

acme66

New member
349
8
0
Location
Plains, Montana
Anyone sourced an oil plug drain valve for the 250? Like the commercial units where it screws in replacing the drain plug and lets you turn the flow of oil on and off? I took one of mine in to the local Cummings shop and they couldn't match the thread. Sure would make changes easier if you had one. Save your old containers and drain into them one at a time rather than messing with all that oil in a huge pan.

Something like this:

http://www.motorhome.com/wp-content/uploads/2011/03/easy-oil-change-valve.jpg

But you know, man sized.

Ken
 

Scar59

Active member
Steel Soldiers Supporter
2,811
41
38
Location
Mt. Eden, KY
Fomoto makes a nice one with a spigot/nipple collar. I believe it is p/n T203N (nipple).
Double check their web site.
 

MtnSnow

New member
1,466
14
0
Location
NSL, UT
The part number for the NHC-250 motor in a Fumoto Valve is T-203 or T-203N (w/ nipple) The plug is a 1" x 18 thread (the Stock OEM plug is NSN # 5365-00-695-1247 (part number 69962))
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks