motorolanut
Member
- 754
- 1
- 18
- Location
- Glenwood WV
Will the Oshkosh Beadlocker 20inch Rims Fit a M813A1??? -
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Oshkosh Combat Rims
- Thread starter motorolanut
- Start date
Will the Oshkosh Beadlocker 20inch Rims Fit a M813A1??? 
dma251
Member
- 648
- 15
- 18
- Location
- Arlington, Washington
yup.
motorolanut
Member
- 754
- 1
- 18
- Location
- Glenwood WV
And I take it they will work with super singles, example 14x20 and 16x20 tires? Is the offset the same as regular super single rims for the M813A1 5 ton series?
Jones
Well-known member
- 2,237
- 83
- 48
- Location
- Sacramento, California
Oshkosh rims are a standard 10 hole Budd pattern and so will fit any hub with that setup.
motorolanut
Member
- 754
- 1
- 18
- Location
- Glenwood WV
Rims
So I am good to go with my M813A1 if I find Oshkosh Rims and tires for super singles?
So I am good to go with my M813A1 if I find Oshkosh Rims and tires for super singles?
dma251
Member
- 648
- 15
- 18
- Location
- Arlington, Washington
I went with the bolt-together combat rims, but I'd say yes. Here's a pic of my project, even though I've only put one on in the picture - I can only work on it a bit every day and it's been raining cats and dogs here lately.
Attachments
motorolanut
Member
- 754
- 1
- 18
- Location
- Glenwood WV
Tires
What size tires do you have on your five ton?
What size tires do you have on your five ton?
M1075
Active member
- 3,589
- 4
- 38
- Location
- Oklahoma City
RE: Tires
Not all Oshkosh trucks take the same rims. HEMTTs and MVTRs are different. The rims currently on GL are different from the ones DMA51 has.
Not all Oshkosh trucks take the same rims. HEMTTs and MVTRs are different. The rims currently on GL are different from the ones DMA51 has.
motorolanut
Member
- 754
- 1
- 18
- Location
- Glenwood WV
RE: Tires
Hemtt rims are what I am looking at, will hemtt's fit???????????
Hemtt rims are what I am looking at, will hemtt's fit???????????
motorolanut
Member
- 754
- 1
- 18
- Location
- Glenwood WV
RE: Tires
that is them do you thing the GL rims will fit?????
that is them do you thing the GL rims will fit?????
- 7,054
- 138
- 63
- Location
- Mid Hudson Valley NY
RE: Tires
Dont forget PLS rims, they are different also.
Dont forget PLS rims, they are different also.
motorolanut
Member
- 754
- 1
- 18
- Location
- Glenwood WV
RE: Tires
PLS Rims????????
PLS Rims????????
- 7,054
- 138
- 63
- Location
- Mid Hudson Valley NY
RE: Tires
M1075 or M1074 Paletized Loading System Truck.. has 10 wheels. Made By Oshkosh... The HEMTT's big brother...
M1075 or M1074 Paletized Loading System Truck.. has 10 wheels. Made By Oshkosh... The HEMTT's big brother...
- 4,040
- 114
- 63
- Location
- Ponchatoula LA
RE: Tires
any idea where i can locate 6 of these rims for my wrecker?
any idea where i can locate 6 of these rims for my wrecker?
- 7,054
- 138
- 63
- Location
- Mid Hudson Valley NY
RE: Tires
Which ones, we have 3 in the discussion................
Which ones, we have 3 in the discussion................
motorolanut
Member
- 754
- 1
- 18
- Location
- Glenwood WV
RE: Tires
Still trying to figure out if the GL Hemmt Rims will fit??
Still trying to figure out if the GL Hemmt Rims will fit??
M1075
Active member
- 3,589
- 4
- 38
- Location
- Oklahoma City
RE: Tires
I do not know whether they will fit. They do look a little different, but I am not sure.
I do not know whether they will fit. They do look a little different, but I am not sure.
dma251
Member
- 648
- 15
- 18
- Location
- Arlington, Washington
RE: Tires
Can someone post a pic of these? If they are the same rims on the Oshkosh Equipment website, they seem to be fitting fine, but I am no expert. I'd trust whatever M1075 has to say on the matter.
Can someone post a pic of these? If they are the same rims on the Oshkosh Equipment website, they seem to be fitting fine, but I am no expert. I'd trust whatever M1075 has to say on the matter.
- 4,040
- 114
- 63
- Location
- Ponchatoula LA
RE: Tires
i too am looking for some rims to convert my m816 to the singles with the 52 inch tires, i have found many tires but not many rims
i too am looking for some rims to convert my m816 to the singles with the 52 inch tires, i have found many tires but not many rims
dma251
Member
- 648
- 15
- 18
- Location
- Arlington, Washington
RE: Tires
There is a guy on Ebay who sells the combat style like I bought, but they are $225 each..... I paid $900 for my first 4, and $100 each for the last 3. Of course if you factor in the additional $560 for sandblasting and powdercoating, and $100 for custom o-rings and flange bolts to hold them together it added up pretty quick. $1860, and that's not even talking about the crap I went through to get the tires.... Maybe $225 each is a good deal...
http://cgi.ebay.com/ebaymotors/5-to...hZ019QQitemZ8071187027QQrdZ1QQsspagenameZWD1V
There is a guy on Ebay who sells the combat style like I bought, but they are $225 each..... I paid $900 for my first 4, and $100 each for the last 3. Of course if you factor in the additional $560 for sandblasting and powdercoating, and $100 for custom o-rings and flange bolts to hold them together it added up pretty quick. $1860, and that's not even talking about the crap I went through to get the tires.... Maybe $225 each is a good deal...
http://cgi.ebay.com/ebaymotors/5-to...hZ019QQitemZ8071187027QQrdZ1QQsspagenameZWD1V